Rustoper (corrosion terminator) VCI Antirust Powder for
Multimetal,It is mainly applied to corrosion-inhibiting treatment
for internal surfaces of depression, hollow or cavity of metal
articles.In a confined space,with gasification,VCI adheres to metal
surfaces to form a compact protection film which plays a role of
antirust,and the fantastic antirust effect can be obtained.
1.No need to do pre-treating when using,saving labor and time.
2.Applicable to the metals with cover and confined space.
3.The powder contains no silicones, phosphate and heavy metals,
being safe to environment.
4.The continuous antirust effects remain if the confined space is
enclosed after being opened.
5.No dirty marks will be left after the powder is applied, and it
is easy to be removed by compressed air or cleaned by water.
1.Equipment manufacturing, export shipment and storage, transport.
2.The antirust for inner surface for piping, fittings, ship,
turbine, heat exchangers, boilers, engines,power equipment, storage
3.Closed cycle cooling system.
4.The antirust for transport and storage process for tools,sparts
5.Export container, storage for hot and cold plates, coils, steel
wire ropes, wires, pipes.
6.Packaging and storage for other metal articles.
7.Applicable to steel,brass,bronze,copper,cadmium alloy,stainless
steel,chromium alloy,nickel alloy,tin,tinplate,zinc alloy,etc.And
the test will be needed when applicable to cast
iron,silver,lead.And not suitable to magnesium alloy.
1.Clean and dry the surfaces of the articles for antirust, without
residual fragments, dirty marks and other filth left on them.
2.When applying loose powder in a dry process, evenly spray the
powder on the surfaces of the articles for antirust with a
low-pressure air hose or a sprayer without particularly
concentrating on any side and the articles may be sealed after the
operation is completed.
3.When applying loose powder in a wet process, prepare the powder
into 0.5%-1% water solution, and then perform spraying, brushing,
flushing or soaking procedures, and the articles may be sealed
after the operation is completed.
4.When applying powder in bag in a dry process, place the powder
bag within the distance (≤30cm) where VCI is valid, and endeavor to
place or suspend it in the upper space of the articles for antirust
because the density of VCI antirust gas is larger than that of air.
5.Generally, the normal consumption is 100g-130g/m3, which will be
increased under severe environment.
6.Operate with clean gloves, and do not contact the articles for
antirust with naked hands.
Custody and Storage:
Seal the products and store them in a cool, dry place, avoiding
direct sunlight and direct contact with fire and corrosive
substances. The warranty period of the product is 24 months since
the date of delivery.