6 cavity Fully automatic rotary Blow Molding Machine / machinery
for PET Bottle 220V 60hz
To make PET bottles for water, carbonated drinks, edible oil, juice
and other liquid bottling.
Diameter of neck
Length of Preform
Diameter of bottle
Height of bottle
Number of cavity
Mold opening stroke (adjustable)
Rod stretch stroke
Bottom moving stroke
Max mold thickness
High pressure compressor
3.2/30 × 1set
Low pressure compressor
2.0/30 × 1set
2.0/30 × 1set
Voltage / frequency
380/50hz or 220/60hz
Machine size and weight
Main machine (L × W × H)
5.5 × 1.9 × 2.0
Main machine weight
Loader (L × W × H)
1.5 × 1.2× 2.2
High pressure compressor (L × W × H)
Low pressure compressor (L × W × H)
Air dryer (L × W × H)
10kg × 3pcs
Auto emergency alarm
Safety inter-locking device
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each
mechanical action, which will make the procedures turn into a state
of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the
action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links
to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to
make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance,
etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
SSW-A6 is the fastest liner blow molding machine in mainland of
China by now. Its baking tunnel is separated from the blow station
so that time for mold opening is shortened with a result of speedy
blowing and high output, damage to machine is lessened so as to
keep reliable performance and prolong service life, as well as
machine runs more smoothly and steadily.
SSW-A6 automatic stretch blow molding machine is equipped with
patented preform loading system, which consists of two
manipulators: rectilineal manipulator and overturning manipulator.
The rectilineal manipulator moves preform with neck up to the
preform holder, after heating, the overturning manipulator grips
heated preform and overturn 180 put preform to blow station with
neck down. After stretching and blowing, the bottle is taken off by
overturning manipulator. The specially designed preform loading
& bottle discharging system avoid possible damage to preform
& bottle during transportation.
SSW-A6 is controlled by PLC. The whole process from preform feeding
to bottle discharging is completed automatically with advantages of
labor saving and no pollution. SSW-A6 consists of three main parts:
preform loading system, Heater channel & blow station.
Mould closing and opening cylinder